MKT - Chemical Anchor VA


	Chemical Anchor for Non-cracked Concrete
	Chemical Anchor V, V A4 and V HCR

[Loads and performance data]

[Installation parameters]

[Product Range]

Chemical Capsule V-P

Threaded Stud V-A

Internal Threaded Sleeve V-IG

Accessories

Description
The ETA-approved Chemical Anchor system V consists of a glass capsule and the threaded stud V-A. The two components contained in the capsule are mixed while the stud/sleeve is driven in, forming a fast setting adhesive. This time proven anchoring system does not apply expansion forces and allows for very small anchor spacings and edge distances. The drill hole is sealed by the adhesive.

Applications
Heavy duty anchorings in non-cracked concrete of steel supports, base plates, consoles, curtain walls, safety railings, crash barriers, street lightning, anti-noise barriers, fastenings in old or damp concrete.

Loads and performance data according to ETA-05/0231 and recommended loads for sizes M14 and M30

non-cracked concrete C20/25				M 8	M 10	M 12	M 14*

tension	appr. N	steel 5.8	[kN]	7,9	11,9	15,9	12,0
shear	appr. V	steel 5.8	[kN]	5,1	8,0	12,0	12,0
		steel 8.8	[kN]	8,6	13,1	18,9	-
		stainless steel	[kN]	6,0	9,2	13,3	12,0
bending moments	appr. M	steel 5.8	[Nm]	10,9	21,1	37,1	59,4
		steel 8.8	[Nm]	17,1	34,3	60,0	-
		stainless steel	[Nm]	11,9	23,8	42,1	66,9


non-cracked concrete C20/25				M 16	M 20	M 24	M 30*

tension	appr. N	steel 5.8	[kN]	19,8	29,8	35,7	60,0
shear	appr. V	steel 5.8	[kN]	22,3	34,9	50,3	60,0
		steel 8.8	[kN]	36,0	56,0	80,6	-
		stainless steel	[kN]	25,2	39,4	56,8	60,0
bending moments	appr. M	steel 5.8	[Nm]	94,9	185,7	320,6	642,0
		steel 8.8	[Nm]	152,0	296,6	513,1	-
		stainless steel	[Nm]	106,7	207,9	359,4	402,0

*Sizes M14 and M30 are not part of the approval
Approved loads for single anchor without influence of spacing and edge distance, total safety factor as per ETAG included.
For anchor designing an easy to operate CD-ROM is available on request or download.

Spacing and edge distance

			M 8	M 10	M 12	M 14
Effective anchorage depth	hef	[mm]	80	90	110	120
Characteristic spacing	scr,N	[mm]	240	180	220	300
Characteristic edge distance	ccr,N	[mm]	120	90	110	150
Minimum spacing	smin	[mm]	40	45	55	120
Minimum edge distance	cmin	[mm]	40	45	55	60
Min. thickness of concrete slab	hmin	[mm]	110	120	140	170

Spacing and edge distance

			M 16	M 20	M 24	M 30
Effective anchorage depth	hef	[mm]	125	170	210	280
Characteristic spacing	scr,N	[mm]	250	340	420	700
Characteristic edge distance	ccr,N	[mm]	125	170	210	350
Min. spacing	smin	[mm]	65	85	105	280
Min. edge distance	cmin	[mm]	65	85	105	140
Min. thickness of concrete slab	hmin	[mm]	160	220	260	330

Installation parameters

			M 8	M10	M12	M14	M16	M20	M24	M30
Drill hole diameter	do	[mm]	10	12	14	16	18	25	28	35
Diameter of clearance hole in the fixture	df	[mm]	9	12	14	16	18	22	26	33
Depth of drill hole	h1	[mm]	80	90	110	120	125	170	210	280
Installation torque	Tinst	[Nm]	10	20	40	60	80	120	180	400
Width across nut	SW	[mm]	13	17	19	22	24	30	36	46
Width across hexagon	SWHex	[mm]	5	6	8	10	12	14	17	-

Installation

Curing time


Temperature of the base material [°C]	Curing time drilled hole dry [min]	Curing time drilled hole wet [min]
+ 35	10	20
+ 30	10	20
+ 20	20	40
+ 10	60	120
+ 5	60	120
0	300	600
- 5	300	600

Product Range

Chemical Capsule V-P, two component glass capsule

Description	Ref. No.	Ø x length [mm]
V-P 8	25100801	9 x 80
V-P 10	25101001	11 x 80
V-P 12	25101201	13 x 95
V-P 14*)	25101401	15 x 95
V-P 16	25101601	17 x 95
V-P 20	25102001	22 x 175
V-P 24	25102401	24 x 210
V-P 30*)	25103001	33 x 265
V-P 16 IG**)	25202201	22 x 115

*) not part of approval

Threaded Stud V-A, steel, zinc plated

Description	Ref. No.	Max. fixture thickness [mm]
V-A 8-20/110	21101101	20
V-A 8-60/150	21105101	60

V-A 10-15/115	21202101	15
V-A 10-30/130	21203101	30
V-A 10-65/165	21207101	65
V-A 10-90/190	21210101	90
V-A 10-150/250	21216101	150
V-A 10-200/300	21221101	200

V-A 12-10/ 135	21304101	10
V-A 12-35/160	21306101	35
V-A 12-85/210	21312101	85
V-A 12-95/220	21313101	95
V-A 12-125/250	21316101	125
V-A 12-175/300	21321101	175

V-A 14-35/170 *)	21408101	35

V-A 16-20/ 165	21507101	20
V-A 16-45/190	21510101	45
V-A 16-85/230	21514101	85
V-A 16-105/250	21516101	105
V-A 16-155/300	21521101	155

V-A 20-20/220	21613101	20
V-A 20-60/260	21617101	60
V-A 20-100/300	21621101	100

V-A 24-15/260	21717101	15
V-A 24-55/300	21721101	55

V-A 30-70/380)*)	21829101	70

Other lengths on demand.
*) not part of approval
**) Setting tool ref.no. 27805160 to be ordered separately.

Threaded Stud V-A, steel, hot dip galvanized

Description	Ref. No.	Max. fixture thickness [mm]
V-A 8-20/110	21101201	20

V-A 10-30/130	21203201	30
V-A 10-90/190	21210201	90

V-A 12-35/160	21306201	35
V-A 12-95/220	21313201	95

V-A 16-20/165	21507201	20
V-A 16-45/190	21510201	45
V-A 16-65/210	21512201	65

V-A 20-20/220	21613201	20
V-A 20-60/260	21617201	60

V-A 24-15/260	21717201	15
V-A 24-55/300	21721201	55

Other lengths on demand.

Threaded Stud V-A, stainless steel A4/316

Description	Ref. No.	Max. fixture thickness [mm]
V-A 8-20/110 A4	21101501	20
V-A 8-60/150 A4	21105501	60

V-A 10-15/115 A4	21202501	15
V-A 10-30/130 A4	21203501	30
V-A 10-65/165 A4	21207501	65
V-A 10-90/190 A4	21210501	90
V-A 10-150/250 A4	21216501	150
V-A 10-200/300 A4	21221501	200

V-A 12-10/135 A4	21304501	10
V-A 12-35/160 A4	21306501	35
V-A 12-55/180 A4	21309501	55
V-A 12-85/210 A4	21312501	85
V-A 12-95/220 A4	21313501	95
V-A 12-125/ 250 A4	21316501	125
V-A 12-175/300 A4	21321501	175

V-A 14-35/170 A4*)	21408501	35

V-A 16-5/150 A4	21505501	5
V-A 16-20/165 A4	21507501	20
V-A 16-45/190 A4	21510501	45
V-A 16-65/210 A4	21512501	65
V-A 16-85/230 A4	21514501	85
V-A 16-105/250 A4	21516501	105
V-A 16-155/300 A4	21521501	155

V-A 20-20/220 A4	21613501	20
V-A 20-60/260 A4	21617501	60
V-A 20-100/300 A4	21621501	100

V-A 24-15/220 A4*)	21713580	15
V-A 24-15/260 A4	21717501	15
V-A 24-55/300 A4	21721501	55

V-A 30-70/380 A4) *)	21829501	70

Other lengths on demand.
*)not part of approval
**) Setting tool ref.no. 27805160 to be ordered separately.

Chemical Anchor V-IG, steel,zinc plated / stainless steel A4/316

(PDF-Download 259 KB)

Accessories

Blow-out Pump

Description	Ref.No.	For drill holes Ø [mm]
VM-AP	33200101	10-35

Cleaning Brush

Description	Ref.No.	Fits for
RB 10	33408101	V M8
RB 12	33410101	V M10
RB 14	33412101	V M12
RB 18	33416101	V M16
RB 26	33424101	V M20
RB 28	33428101	V M24
RB 35	33435101	V M30